10 September 2014

Allied Armour

With the publication of Big Chain of Command, I thought I would get my allied armour in order. This update allows the addition of extra infantry and armoured platoons while using the same basic mechanic as the platoon based game. It is pretty simple and really just delineates some changes in the terrain size, how the patrol phase and order of play is modified. There is also some modification to the morale table. With my 20mm army I, think I will be fine with the addition of an armoured platoon or infantry platoon in respect to my 6x4' playing surface.

For my initial forces, I bought several boxes of PSC AFV's but generally painted just one vehicle or tank from each box. The update for CoC also gives an outline of basic platoon structure for several nations, so I thought I would start going through what I had and get the glue out. The recent addition of an Iwata airbrush that actually works made things easy.

First up I thought I would do the British/Canadian platoons. These were my weakest forces in respect to armour, and were far out done by the Soviets and the Germans. I had a box of 76mm Shermans as well as some Universal Carriers and had just bought a box of Churchills.


Here we have some Canadian troops in a Universal Carrier Section. This is post 1943 organization, with a sergeant in command of 11 troops. They have 3 Carriers, 3 Bren guns, a Piat and are all armed with rifles. There is 2 Mk2 versions and one Mk1 version ( the lighter shade). Main difference is front fender and headlights.
Vehicle marking indicate that they are in the 1st Canadian Division who saw service in the Netherlands late in the war. I am sure my chaps will see service in Normandy as well. Slight colour variation, I had previously used BF Late War British Armour, the newer vehicles have been initially airbrushed with Vallejo Russian Green. They are a List 8 support. 
They of course are from one of the most famous Canadian regiments the Royal 22nd colloquially known as Vandoos and officially now known as Royal 22é Régiment. They are third in order of precedence in the Canadian Army. 
Next up we have a couple of Churchills. I have gone with the MkVII version, as these tanks are for Normandy. They have thicker armour then previous versions but have the the same 75mm gun. 
A close up of my latest method for doing rust, it is a little too thick here. Essentially I paint on some diluted PVA. I then apply a liberal coating of Secret Weapon Dark Earth pigment, followed by a dash of their Terracotta pigment. This is followed by Citadel Necron Metal Dry paint applied carefully on the tracks.
These two monsters belong to the 4th Royal Tank Regiment, in the 34th Independent Tank Brigade. They have a support rating of -1 in the Big CoC lists with just 2 tanks.
Lots of extra stowage from Value Gear. I am hoping all the markings are correct. Generally the British had 3 tanks in each Heavy Tank Platoon, so this is slightly understrength, I suspect I will be adding a tank.
Last up is a platoon of Shermans, again they are understrength, I will be adding a Firefly. They are presently +1 Supports. The markings are for the Trois Rivieres, 12é ATR They landed in Normandy as part of the 2nd Canadian Armoured Brigade and fought through out Northwest Europe until the end of the war.
Again some variation in colour. I suspect the individual tank names are wrong for a Quebec regiment!  
Again more stowage added. These are very nice tanks. The decals are from Aleran.
Slightly better effect here
These three units all served in the 1st Canadian Army, with the R22éR and the 12é ATR in the II Canadian Corps with the 4th RTR under the XXX Corps. The 1st Canadian Army was the largest army ever commanded by a Canadian General with around 450,000 soldiers, a little more the half Canadian with the rest being British, Belgic and Polish troops.

So it is going to be very tempting to bring these 2 platoons up to strength. I think PSC sells sprues which would be good as I need only one Churchill and one Firefly. I suspect I will add a platoon of anti-tank vehicles, those Achilles from Armourfast look very nice. But next up I hope to post my Soviet armour, of which I have quite a lot.


19 comments:

  1. Excellent work, the detailing is great!

    ReplyDelete
    Replies
    1. Thank you AJ, they came off the table pretty quickly

      Delete
  2. Beautiful details, rust and mud effects are great...

    ReplyDelete
  3. That's some really stunning painting! The rust looks great.

    ReplyDelete
  4. Really nice work. Great weathering effects.

    ReplyDelete
    Replies
    1. Looks like you guys in Kingston have a nice campaign going.

      Delete
    2. We sure do, getting to the crunch time of the campaign now. Has been a lot of fun.

      I hope to see those tanks of yours in a battle some time soon.

      Delete
    3. Hoping to get one going here soon.

      Delete
  5. Very nice John, I love the Churchills.

    ReplyDelete
  6. Really nice work, John. Great to see the Canadians represented - Ontario Tanks and Three Rivers judging by the tacs. Those and the Van Doos also fought in Italy, of course, so lots of potential for action!

    ReplyDelete
    Replies
    1. Yes Trois Rivieres, I have the Van Doo tac markings wrong, they are the brigade tacs rather then the unit tacs.

      Delete
  7. Beautiful! I love the Churchills MkIIs especially (my favourite tank of the war). You did a lovely job on the weathering John!

    ReplyDelete
    Replies
    1. Thanks Curt, I enjoy painting tanks......lot easier then Napoleonics

      Delete
    2. Haha, yes indeed, I'm absolutely with you there on that one!

      Delete