I feel I am an indifferent painter, I like to be accurate in respect to uniform, but at the same time would never have the patience to paint like these great amateur painters (Quindia Studios, Roly's Wargames Cabinet). I am more excited to see the fully based painted unit on my wargames table.
I use a pretty basic painting technique, doing a unit of figures (12-18) at a time by gluing them on 2 ft sticks. I use a black primer. I liked GW chaos black primer, but they recently changed the formulation (so what else is new) so I now use a automotive primer. This is followed by a white dry brush over the full figure, this really pulls out the details for me and makes the figure much easier to paint. I then either do another dry brush with the required colour or lately I have been experimenting with the new GW washes over the white drybrush, but more about that later. I sometimes supplement this with a lighter shading or darker washes or inks, but a lot of the time I do not need to, as the black primer with a white dry brush followed by the colour gives you fairly nice shading. I then do the straps, bags, guns, etc.
I use GW elf flesh on the face and hands followed by their sepia wash, this is good for me as I have no interest in colouring in eyes etc. I then use a matt varnish and finish by doing the base.
A prize to ever can identify the object stuck in the right side of the lower shelf.
A Cod Jigger!
ReplyDeleteI've used one before, so I suppose it doesn't count. ;-)
Well there is supposed to be a prize, so if you send me your address I will send you a little something that may be helpful in your black powder games.
ReplyDelete